PRODUCTION OF LIQUID SOAP IN SHORT NOTE

MATERIALS AND STEPS FOR LIQUID SOAP PRODUCTION

Step 1 - Prepare all ingredients and tools for production. 

Step 2 -Dissolve caustic soda and soda ash in water and stir. 

Step 3 -Dissolve CMC in a separate bowl and stir. 

Step 4 - Mix the Texapon and the Sulphuric acid and stir.

Step 5 - Add the dissolved caustic and soda ash to the dissolved CMC and stir. 

Step 6 - Add dissolved texapon and surphonic acid to the CMC mixture and stir. 

Step 7 - Pour Glycerin into the mixture and stir. 

Step 8 - Add the formalin to the mixture and stir. 

Step 9 - Mix your colorant and stir until the colour is evenly distributed. 

Step 10 - Allow the mixture to settle for 45 minutes to 1 hour. 

Step 11 - Add perfume to mixture and stir 

Step 12 - Add the booster to mixture and stir.

Step 13- Add water and stir until you get the desired consistency. 

Step 14 -Cover the mixture and allow to sit for 24hours before packaging for sale. 

Note: To produce 25 liters of liquid soap: • Use 10 liters of water to dissolve the CMC • Use 10 liters of water to dissolve the caustic soda and soda ash • Add approximately 5 liters of water while mixing to get the desired consistency. • You may add extra water to make the liquid soap more and lighter if you are selling to customers like road side restaurant owner